vyos.vyos.vyos_lldp_interfaces – LLDP interfaces resource module
Note
This plugin is part of the vyos.vyos collection (version 2.6.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install vyos.vyos.
To use it in a playbook, specify: vyos.vyos.vyos_lldp_interfaces.
New in version 1.0.0: of vyos.vyos
Synopsis
- This module manages attributes of lldp interfaces on VyOS network devices.
Note
This module has a corresponding action plugin.
Parameters
| Parameter | Choices/Defaults | Comments | ||||
|---|---|---|---|---|---|---|
| config
list / elements=dictionary
|
A list of lldp interfaces configurations.
|
|||||
| enable
boolean
|
|
to disable lldp on the interface.
|
||||
| location
dictionary
|
LLDP-MED location data.
|
|||||
| civic_based
dictionary
|
Civic-based location data.
|
|||||
| ca_info
list / elements=dictionary
|
LLDP-MED address info
|
|||||
| ca_type
integer
|
LLDP-MED Civic Address type.
|
|||||
| ca_value
string
|
LLDP-MED Civic Address value.
|
|||||
| country_code
string / required
|
Country Code
|
|||||
| coordinate_based
dictionary
|
Coordinate-based location.
|
|||||
| altitude
integer
|
Altitude in meters.
|
|||||
| datum
string
|
|
Coordinate datum type.
|
||||
| latitude
string / required
|
Latitude.
|
|||||
| longitude
string / required
|
Longitude.
|
|||||
| elin
string
|
Emergency Call Service ELIN number (between 10-25 numbers).
|
|||||
| name
string / required
|
Name of the lldp interface.
|
|||||
| running_config
string
|
This option is used only with state parsed.
The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep lldp.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
|
|||||
| state
string
|
|
The state of the configuration after module completion.
|
||||
Notes
Note
- Tested against VyOS 1.1.8 (helium).
- This module works with connection
network_cli. See the VyOS OS Platform Options.
Examples
# Using merged
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
#
- name: Merge provided configuration with device configuration
vyos.vyos.vyos_lldp_interfaces:
config:
- name: eth1
location:
civic_based:
country_code: US
ca_info:
- ca_type: 0
ca_value: ENGLISH
- name: eth2
location:
coordinate_based:
altitude: 2200
datum: WGS84
longitude: 222.267255W
latitude: 33.524449N
state: merged
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# before": []
#
# "commands": [
# "set service lldp interface eth1 location civic-based country-code 'US'",
# "set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'",
# "set service lldp interface eth1",
# "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
# "set service lldp interface eth2 location coordinate-based altitude '2200'",
# "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
# "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
# "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
# "set service lldp interface eth2 location coordinate-based altitude '2200'",
# "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
# "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
# "set service lldp interface eth2"
#
# "after": [
# {
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth2"
# },
# {
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth1"
# }
# ],
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'
# Using replaced
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'
#
- name: Replace device configurations of listed LLDP interfaces with provided configurations
vyos.vyos.vyos_lldp_interfaces:
config:
- name: eth2
location:
civic_based:
country_code: US
ca_info:
- ca_type: 0
ca_value: ENGLISH
- name: eth1
location:
coordinate_based:
altitude: 2200
datum: WGS84
longitude: 222.267255W
latitude: 33.524449N
state: replaced
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "before": [
# {
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth2"
# },
# {
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth1"
# }
# ]
#
# "commands": [
# "delete service lldp interface eth2 location",
# "set service lldp interface eth2 'disable'",
# "set service lldp interface eth2 location civic-based country-code 'US'",
# "set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'",
# "delete service lldp interface eth1 location",
# "set service lldp interface eth1 'disable'",
# "set service lldp interface eth1 location coordinate-based latitude '33.524449N'",
# "set service lldp interface eth1 location coordinate-based altitude '2200'",
# "set service lldp interface eth1 location coordinate-based datum 'WGS84'",
# "set service lldp interface eth1 location coordinate-based longitude '222.267255W'"
# ]
#
# "after": [
# {
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth2"
# },
# {
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth1"
# }
# ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 'disable'
# set service lldp interface eth1 location coordinate-based altitude '2200'
# set service lldp interface eth1 location coordinate-based datum 'WGS84'
# set service lldp interface eth1 location coordinate-based latitude '33.524449N'
# set service lldp interface eth1 location coordinate-based longitude '222.267255W'
# set service lldp interface eth2 'disable'
# set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth2 location civic-based country-code 'US'
# Using overridden
#
# Before state
# --------------
#
# vyos@vyos:~$ show configuration commands | grep lldp
# set service lldp interface eth1 'disable'
# set service lldp interface eth1 location coordinate-based altitude '2200'
# set service lldp interface eth1 location coordinate-based datum 'WGS84'
# set service lldp interface eth1 location coordinate-based latitude '33.524449N'
# set service lldp interface eth1 location coordinate-based longitude '222.267255W'
# set service lldp interface eth2 'disable'
# set service lldp interface eth2 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth2 location civic-based country-code 'US'
#
- name: Overrides all device configuration with provided configuration
vyos.vyos.vyos_lldp_interfaces:
config:
- name: eth2
location:
elin: 0000000911
state: overridden
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "before": [
# {
# "enable": false,
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth2"
# },
# {
# "enable": false,
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth1"
# }
# ]
#
# "commands": [
# "delete service lldp interface eth2 location",
# "delete service lldp interface eth2 disable",
# "set service lldp interface eth2 location elin 0000000911"
#
#
# "after": [
# {
# "location": {
# "elin": 0000000911
# },
# "name": "eth2"
# }
# ]
#
#
# After state
# ------------
#
# vyos@vyos# run show configuration commands | grep lldp
# set service lldp interface eth2 location elin '0000000911'
# Using deleted
#
# Before state
# -------------
#
# vyos@vyos# run show configuration commands | grep lldp
# set service lldp interface eth2 location elin '0000000911'
#
- name: Delete lldp interface attributes of given interfaces.
vyos.vyos.vyos_lldp_interfaces:
config:
- name: eth2
state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
before: [{location: {elin: 0000000911}, name: eth2}]
# "commands": [
# "commands": [
# "delete service lldp interface eth2"
# ]
#
# "after": []
# After state
# ------------
# vyos@vyos# run show configuration commands | grep lldp
# set service 'lldp'
# Using gathered
#
# Before state:
# -------------
#
# vyos@192# run show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'
#
- name: Gather listed lldp interfaces from running configuration
vyos.vyos.vyos_lldp_interfaces:
config:
state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "gathered": [
# {
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth2"
# },
# {
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth1"
# }
# ]
#
#
# After state:
# -------------
#
# vyos@192# run show configuration commands | grep lldp
# set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
# set service lldp interface eth1 location civic-based country-code 'US'
# set service lldp interface eth2 location coordinate-based altitude '2200'
# set service lldp interface eth2 location coordinate-based datum 'WGS84'
# set service lldp interface eth2 location coordinate-based latitude '33.524449N'
# set service lldp interface eth2 location coordinate-based longitude '222.267255W'
# Using rendered
#
#
- name: Render the commands for provided configuration
vyos.vyos.vyos_lldp_interfaces:
config:
- name: eth1
location:
civic_based:
country_code: US
ca_info:
- ca_type: 0
ca_value: ENGLISH
- name: eth2
location:
coordinate_based:
altitude: 2200
datum: WGS84
longitude: 222.267255W
latitude: 33.524449N
state: rendered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
# "set service lldp interface eth1 location civic-based country-code 'US'",
# "set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'",
# "set service lldp interface eth1",
# "set service lldp interface eth2 location coordinate-based latitude '33.524449N'",
# "set service lldp interface eth2 location coordinate-based altitude '2200'",
# "set service lldp interface eth2 location coordinate-based datum 'WGS84'",
# "set service lldp interface eth2 location coordinate-based longitude '222.267255W'",
# "set service lldp interface eth2"
# ]
# Using parsed
#
#
- name: Parsed the commands to provide structured configuration.
vyos.vyos.vyos_lldp_interfaces:
running_config:
"set service lldp interface eth1 location civic-based ca-type 0 ca-value 'ENGLISH'
set service lldp interface eth1 location civic-based country-code 'US'
set service lldp interface eth2 location coordinate-based altitude '2200'
set service lldp interface eth2 location coordinate-based datum 'WGS84'
set service lldp interface eth2 location coordinate-based latitude '33.524449N'
set service lldp interface eth2 location coordinate-based longitude '222.267255W'"
state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": [
# {
# "location": {
# "coordinate_based": {
# "altitude": 2200,
# "datum": "WGS84",
# "latitude": "33.524449N",
# "longitude": "222.267255W"
# }
# },
# "name": "eth2"
# },
# {
# "location": {
# "civic_based": {
# "ca_info": [
# {
# "ca_type": 0,
# "ca_value": "ENGLISH"
# }
# ],
# "country_code": "US"
# }
# },
# "name": "eth1"
# }
# ]
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after
list / elements=string
|
when changed |
The configuration as structured data after module completion.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
| before
list / elements=string
|
always |
The configuration as structured data prior to module invocation.
Sample:
The configuration returned will always be in the same format of the parameters above.
|
| commands
list / elements=string
|
always |
The set of commands pushed to the remote device.
Sample:
["set service lldp interface eth2 'disable'", 'delete service lldp interface eth1 location']
|
Authors
- Rohit Thakur (@rohitthakur2590)
© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/vyos/vyos/vyos_lldp_interfaces_module.html